VESPA GTS 300 i.e., Manual

Page: 12 / 98

- Partial odometer B (TRIP B)
For this indicator, the unit of measurement can be changed (from Km to Miles) with
the following procedure:
- turn the key to the « OFF » position;
- press the « MODE » button;
- Holding in the « MODE » button, turn the key to the « ON » position;
- after about 2 seconds release the « MODE » button.
WARNING
TO GO FROM «KM» TO «MILE» THE MULTIFUNCTION INDICATOR «C» MUST
BE SET TO TOTAL ODOMETER (TOTAL).
N.B.
IN THE NAVIGATION OF THE DISPLAY ARE DEFINED:
- «BRIEF PRESS»: A PRESS OF THE INDICATED BUTTON, FOR A PERIOD OF
LESS THAN TWO SECONDS;
- «PROLONGED PRESS»: A PRESS OF THE INDICATED BUTTON, FOR A PE-
RIOD OF MORE THAN TWO SECONDS.
01_04
*MODE* button (01_04)
With the vehicle running or with the key in position « ON », by short pressing the MODE
key « A », the odometer view can be changed (TOTAL, TRIP A, TRIP B).
By pressing and holding the MODE key, it is possible to:
- on the TOTAL screen page, proceed with adjusting the clock;
- on the TRIP A or TRIP B screen page, reset the relative counter.
12
1 Vehicle