VESPA GTS 300 i.e., Manual

Page: 24 / 98

Immobilizer device enabled indicator led (01_16)
CAUTION
WITH THE ENGINE RUNNING, THE WARNING LIGHT «A» HAS THE FUNCTION
TO SIGNAL THE ENGINE COOLANT TEMPERATURE. REFER TO THE SECTION
«MAINTENANCE» / «COOLANT LEVEL».
01_16
Activation of the "PIAGGIO IMMOBILIZER" system is signalled by a flashing « A »
indicator. In order to reduce battery discharge, the indicator LED turns off automatically
after 48 hours of uninterrupted functioning. Should the system fail, different LED flash-
ing patterns will provide the
Authorised Service Centre with information on the type
of fault detected.
Operation
Every time the ignition key is removed in the " OFF " or " LOCK " position, the safety
system activates the immobilizer system. Turning the key to " ON " disables the engine
lock, provided that the safety system recognises the code transmitted by the key. If
the code is not recognised, turn the key first to "
OFF " and then to " ON "; if the lock
cannot be disabled, try with the other key supplied (brown). If the engine cannot be
started, contact an
Authorised Piaggio Service Centre , which is provided with the
electronic equipment required to detect and repair the system. The Immobilizer is also
activated by switching off the engine with the
RUN OFF switch. This happens even if
the starter key is in « ON ».
When additional keys are required, please note that data storage (up to 7 keys max.)
must be done on all keys, both new and existing ones. Take the key with the brown
grip and all the blue keys supplied to an
Authorised Piaggio Service Centre . The
24
1 Vehicle