VESPA GTS 300 i.e. Manual Download Page 68

Page: 68 / 98

03_25

03_26

03_27

This gives access to the bulbs. Turn the clip and take out the bulb of the high-beam/
low-beam headlamp «

».

To reassemble, repeat the operation but in reverse order.

WARNING

THE TWIN-FILAMENT (HIGH-BEAM AND LOW-BEAM) BULB IS HALOGEN: DO
NOT TOUCH THE BULB WITH YOUR FINGERS TO AVOID COMPROMISING ITS
FUNCTIONING

N.B.

IF MISTING IS NOTICED ON THE INSIDE OF THE HEADLAMP GLASS, THIS
DOES NOT INDICATE A FAULT AND IS ATTRIBUTABLE TO HUMIDITY AND/OR
TO LOW TEMPERATURES.

THE PHENOMENON SHOULD QUICKLY DISAPPEAR WHEN THE LIGHT IS
SWITCHED ON.

THE PRESENCE OF DROPS OF WATER, ON THE OTHER HAND, COULD INDI-
CATE THAT WATER IS INFILTRATING. CONTACT THE AFTER-SALES SERVICE
NETWORK.

3 Maintenance

Summary of Contents for GTS 300 i.e.



































































































Search results

Summary of Contents for GTS 300 i.e.

Reviews:

Related manuals for GTS 300 i.e.

Brands by name

Popular brands

VESPA GTS 300 i.e., Manual

Search results

Summary of Contents for GTS 300 i.e.

Reviews:

Related manuals for GTS 300 i.e.

Brands by name

Popular brands