17 (22)
User Manual Vesala PK2 Receiver X2.0 ENG
4.6
Offset measurement with PKR2 and PKT2
Place the transmitter on an area where no
metal is present. Measure the distance and
direction from the receiver to the intended
drilling point. Locate the corresponding
spot relative to the transmitter on the other
side of the structure and use reverse
measurement to define the drilling point.
4.7
Multipoint measurement with PKR2 and PKT2
Measure at least two, preferably four points at exactly same distance from the intended drilling
point. Make separate measurements and markings for each
reference point. The
correct drilling spot is at
the geometrical midpoint
of the reference points.
