User Manual Vesala PK2 Receiver X2.0 ENG
12 (22)
3.4
Selecting the transmitter type and distance measuring units
When delivered, Receiver PKR2 displays distance from Transmitter PKT2 in centimetres. SPL2
SmartPlug Locator displays distance from SmartPlug SP15 or Plug Transmitter TX15 in
centimetres. The units or the transmitter used with SPL2 SmartPlug Locator cannot be changed.
Receiver PKR2 has two other modes: display distance from Transmitter PKT2 in inches and
display distance from SmartPlug SP15 or Plug Transmitter TX15 in centimetres. If you use a
different transmitter than supplied with Receiver PKR2 or wish to change distance measuring
units, follow the sequence below.
1.
If device is on, shut it down.
2.
Press and hold power button for an extended time.
3.
One of the following will eventually appear on display. Currently selected units are
displayed first.
4.
U: cn - distance from Transmitter PKT2 in centimetres
5.
U: In - distance from Transmitter PKT2 in inches
6.
U: PH - distance from SmartPlug SP15 or Plug Transmitter TX15 in centimetres
7.
Device will beep and display new units. To change units, release Power button when
desired unit is visible.
8.
Continuing to hold Power button cancels units change. This is indicated with a beep.
If you wish to change transmitter or units again, repeat the sequence above. Selecting the
wrong transmitter will either display incorrect distance or prevent operation completely.
