15 (22)
User Manual Vesala PK2 Receiver X2.0 ENG
Respectively, when locating SmartPlug SP15 or Plug
Transmitter TX15, the receiver should be used perpendicular
to the transmitter. Notice this especially when the transmitter
has been installed in an angle to the structure.
4.4
Operating the receiver
Place the receiver against the structure with the user interface
towards the user. Move the receiver slowly to the direction
indicated by red arrows. Two arrows pointing to a direction
indicate a long distance, one stands the proximity of the
measured point. The audio signal pitch increases when the
receiver is moved towards the correct spot. Green squares
indicate when the receiver is aligned with the transmitter.
When only four green squares are displayed on the receiver,
the transmitter and receiver are aligned and the distance
between them can be read on the display. The spot can now be
marked through the receiver's centre hole.
