User Manual Vesala PK2 Receiver X2.0 ENG
16 (22)
4.5
Measurement at an angle
When a drill point needs to be located at an angle other
than 90° to the surface of a structure, start by attaching
the transmitter to the structure at the desired angle of the
drill hole. Locate the transmitter while holding the
receiver at an equal angle. A wedge made from a non-
metallic material may be used to hold the devices at the
desired angle. If the angles are not identical, the resulting
hole should be drilled from both sides of the structure so
that the holes meet inside the structure at different
angles.
