Vertiv
|
NetSure Monitor Unit User Manual (UM1M832DNA)
|
Rev. C
56
Distribution Bay Settings Web Page
Click
in
to go to the Distribution Bay Settings Web Page. Click the X to close the window and go
back to the Distribution Bay Web Page.
To change a programmable parameter, select or enter a new value for the parameter then click on “Set” to
change the value.
Figure 20:
Distribution Bay Settings Web Page
•
Bay Full Name: Name displayed in the Web Interface menus.
•
Bay Abbr Name: Name displayed in the local display menus.
•
Site Name: Enter a name for the site the bay is located in.
•
Capacity: Enter the bay’s capacity.
•
High Current Limit 1: Enter the bay’s high current 1 alarm setpoint. Enter the percentage value of the
"capacity" for alarm.
•
High Current Limit 2: Enter the bay’s high current 2 alarm setpoint. Enter the percentage value of the
"capacity" for alarm.
•
Number of Panels: Enter the number of panels installed in the bay.
•
Clear Data: Clears the data stored for the bay.
