Vertiv NetSure M832DNA User Manual Download Page 103

Page: 103 / 176

Vertiv

NetSure Monitor Unit User Manual (UM1M832DNA)

Rev. C

103

DO (relay) Tab

•

Allows you to use the relay test feature.

Relay Test: Sets the Relay Test feature to Automatic, Manual, or Disabled. Refer to “Using the
Relay Test Feature” on page 28.

Relay Test Time: Sets the Relay Test Time for the Automatic Relay Test feature.

•

Allows you to set the relay active or not active.

Temporarily sets the relay active or not active. Setting reverts to original after a preset non-
adjustable time period. Refer to “Using the Relay Test Feature” on page 28.

•

Allows you to change the relay signal full name (name displayed in the Web Interface menus).

Figure 69:

DO (Relay) Tab

Procedure

To change the relay signal full name (name displayed in the Web Interface menus), click on the “Modify”
button for that relay.

The following window opens.

Figure 70:

Changing Relay Signal Full Name

Summary of Contents for NetSure M832DNA

















































































































































































Search results

Summary of Contents for NetSure M832DNA

Reviews:

Related manuals for NetSure M832DNA

Brands by name

Popular brands

Vertiv NetSure M832DNA, User Manual

Search results

Summary of Contents for NetSure M832DNA

Reviews:

Related manuals for NetSure M832DNA

Brands by name

Popular brands