Vertiv
|
NetSure Monitor Unit User Manual (UM1M832DNA)
|
Rev. C
22
Logging into the Monitor Unit
Procedure
Internet Explorer, version 6 or newer, is supported (IE 8.0 is recommended). Chrome, Safari, and Firefox are also
supported.
1.
In your browser, enter http:// and the monitor unit’s IP address (see “Connecting a Local Computer
Directly to the Monitor Unit when the System is NOT Equipped with an IB4 Board” on page 16 or
“Connecting a Local Computer Directly to the Monitor Unit when the System IS Equipped with an IB4
Board” on page 17) and press
ENTER. If your site requires secure HTTP and you were furnished with an
monitor unit configuration with secure HTTP, enter https:// and the monitor unit’s IP address and press
ENTER.
2.
The following Web Interface Login window opens. Enter a valid
User Name and Password
,
then click
LOGIN.
NOTE!
By default, the “User Name” is "admin" and the “Password” is “640275”. The password can be
changed if necessary (see “Users Tab” on page 89).
NOTE!
Before entering a User Name and password, you can select a local language that the Web
Interface menus use from those listed in the top right corner of the login window. See “Language Tab”
on page 94.
3.
After entering a valid
User Name and Password and clicking LOGIN
,
the Web Interface "HOMEPAGE"
window opens. Refer to “Web Interface Screens” on page 52.
You can program a “Forgot Password” feature. Once programmed, if you forgot your password, click
Forgot
Password in the login screen. A "Find Password" window opens. Enter your User Name and click Find
Password. The monitor unit sends the password to the email address programmed for this User Name.
•
To set up the “Forgot Password” feature, you must have a User set up with an email address and you
must set up the Alarm Reporting SMTP section. To program the User, in the Web Interface, go to
Advanced Settings Menu / Users Tab / select the User / enter a valid email address for this User /
repeat for all Users (see “Users Tab” on page 89). To program the Alarm Reporting SMTP section, in the
Web Interface, go to Advanced Settings Menu / Alarm Report Tab / SMTP Section / enter at a minimum
