Vertiv EXM 0080kTK16FN01000, User Manual

Page: 64 / 156

50 Chapter 4 Operator Control And Display Panel
Liebert EXM 80kVA ~ 200kVA UPS User Manual
2. Touch an icon to choose the data to be displayed in the panel (see Figure 4-13); choices are:
One-Line Run Hours
Status Event Log
Alarms Battery Cycle Monitor Summary
Change UNIT STATUS Panel Content
3. To change the UNIT STATUS panel’s data:
a. Touch the Edit icon on the UNIT STATUS panel and hold it until the Change Content button and X’s
appear beside the parameters.
b. Touch the X beside the parameter to be removed from the panel. The Add Parameter icon (+) will
appear in the panel if another parameter can be added. The number of parameters possible is based on
whether the Status Gauge is showing.
c. Touching the Add Parameter icon brings up a window to add parameters not already shown on
the UNIT STATUS panel.
d. Touch a parameter’s icon to add it to the UNIT STATUS panel. Resize or Remove a Panel
4. Touch and hold the Edit icon again while the Change content button is displayed.
5. Release the icon. Resize handles will appear around the panel and a large X will appear at the top right
corner.
6. Pull on a handle to resize the panel, or
7. Touch the large X to delete the panel.
Rearrange Panels
8. With the resize/remove handles visible, touch the circle in the center of the panel and drag the panel to
its new position.
Exit Edit Mode
9. Edit Mode will deactivate after some changes. If all changes have been made and Edit Mode is active,
touch the panel’s header area.
Figure 4-13 Change panel content or resize/remove a panel