Vertiv APM 0250kMK16FN02000, User Manual

Page: 67 / 192

• Display Properties: Language, backlight timer, alarm timeout, auto-log-out timer, display brightness, status
indicator brightness and touchscreen calibration (see Customizing the Display); language and display
brightness only are available to Observer
• Date & Time: Drop-down lists for time zone, date, local time and UTC time (Coordinated Universal Time) (see
Customizing the Display); not available to Observer
• Formats: Drop-down lists for date and time format and measurement system (metric or imperial) (see
Customizing the Display)
• Technical Support: Manufacturer's support: Web site, e-mail address and telephone numbers
• About: Information about the UPS and its software and firmware; UPS model, rating, configured capacity, model
number and serial number
Mimic Display Components
The animated mimic display shows each configured major component of the UPS system, for both single-module and multi-
module systems. The mimic display is the same for all access levels. The power path is shown by animated lines; moving
dashes show the active power path. Breakers are shown as open or closed (see Figure 5.5 below), but are not interactive.
Components in the mimic display signify their operational status by their color, green, amber or red. Table 5.1 on page 93
through Table 5.3 on page 95 describe the various states of the indicators. Touching a component brings up details about
its status.
F igu re 5.5 M im ic display, n o rm al o peratio n
5 Operator Control and Display Panel
59
Vertiv™ Liebert® APM Plus User Manual