Vertical Wave Phone, User Manual

Page: 52 / 180

Conference Calls 3
-
24
Using Wave Phone Features
Wave Phone User Guide
Conference Calls
You can set up a conference call that includes both internal and external parties. If you have a
Conference ( ) button or a Flash button, you can set up a conference call.
Hint:
Contact your System Administrator for the maximum number of parties allowed on a
single conference call.
Setting Up a Conference Call [ALL]
SIP PHONES
To Set Up a Conference Call Using the Conference ( ) Button
With a party on the line:
1. Press Conference ( ) to place the other party on hold.
On some models, there is a
CONF
softkey.
2. Listen for the dial tone, then dial the number of the next party.
3. When that party answers, press Conference ( ) again to connect the calls.
• If a party is not available, press End Call to reconnect to the first party.
• For 480i/CT, 9480i/CT, and all Aastra Series 5 models: press Goodbye ( to
reconnect to the first party.
Repeat steps above for each party you want to include in the conference (up to
the allowed maximum).
When all parties have been connected:
4. Press Conference ( ) one more time to complete the set up process and
begin the conference call between all current parties.
To Make a Conference Call with Feature Codes
During a call:
1. Press Flash to place the other party on hold.
2. Listen for the dial tone, then dial the extension of the third party.
Release 1.5 SP2 June 2009