Vertical Wave Phone User Manual Download Page 127

Page: 127 / 180

Phone Settings

About Wave SIP Phones

Wave Phone User Guide

Phone Settings

Setting Options

Pressing the

Options

button gives you a list of configurable

options.

The first seven options allow you to customize your phone
settings.

Setting Options 01 through 06

Press

Options

, then follow the prompts that appear on the

display (use the navigation keys as shown on page 5-14 to
scroll and make selections as appropriate.

Setting Option 7

For option 7, see “Advanced Volume Controls for the
Headset/Mic (Option 7)” on page 5-17.

Setting Options 08 through 10

Contact your System Administrator for information.

Advanced Volume Controls for the Headset/Mic

(Option 7)

There are three options for the headset microphone volume.

Note:

By default, the volume for the headset microphone is set to medium.

To Change the Volume

Press

Options

to access the options list.

Scroll down the list of options.

Select

Headset Settings

Note:

You can also press 7 to directly access the Headset settings, then press the

corresponding select button to select Headset Settings that appears on the display.

Scroll down and select

Headset/Mic Volume

Scroll down the list and select the appropriate volume.

Select

Save

to store the settings and exit.

If you do not want to save changes:

Press the left select button to return to the previous screen.

Language

Time and Date

Set Ring Tone

Clear Msg. Wtg.

Contrast Level

Live Dialpad

Headset Settings

Network Settings

SIP Settings

Phone Status

Release 1.5 SP2

June 2009

Summary of Contents for Wave Phone





















































































































































































Search results

Summary of Contents for Wave Phone

Reviews:

Related manuals for Wave Phone

Brands by name

Popular brands

Vertical Wave Phone, User Manual

Search results

Summary of Contents for Wave Phone

Reviews:

Related manuals for Wave Phone

Brands by name

Popular brands