Vertical Wave Phone, User Manual

Page: 28 / 180

Basic Phone Handling 2
-
10
Basic Operation
Wave Phone User Guide
If You Hear the Double Beep
You can press
#
to use the contact’s associated account code.
OR
You can enter a different account code, then press
#
.
Note:
If you enter the wrong account code, press Flash before pressing # and the system
will let you re-enter it.
Note: Depending on how your Wave System Administrator configured your system, the
prompt may occur either after you dial the access code or after you dial the phone number.
If the prompt occurs after you dial the access code, enter the account code followed by
#
,
and then continue entering the phone number.
You would dial 9 [listen for the prompt] 8812 # 212 123 4567 (where 9 is the access code and
8812 is the account code, and the numbers after # are the area code and phone number).
Disabling Call Waiting for a Call
Disabling call waiting is useful if you are using your extension to send faxes or to connect to the
Internet. In both cases, a call waiting tone disrupts the data flow.
To Disable Call Waiting for a Call
Press *70 and dial the number.
You do not hear the call waiting tone during that call. Incoming calls while you are on
that call are sent directly to your voicemail. After the call ends, call waiting is enabled
again.
Note:
You can enter *70 as part of your fax dial string. For example, your fax dial string
might be *70 9 1 617 555 7744 .
Release 1.5 SP2 June 2009