Vertical Edge 5000, Installation/Configuration Instructions

Page: 97 / 168

Phone Settings 4-19
Chapter 4: Using Web Manager for Configuration
Edge 5000 Installation / Configuration Guide
In the Phone Settings screen, the following parameters may be modified.
- Phone Settings
• Frame Duration sets the interval to send/receive RTP packets in milli-seconds.
• Headset Auto Mode enables headset operation.
• DTMF Relay selects the method for DTMF signaling (in-band, out-of-band or
negotiate).
• DTMF Payload sets the RFC 2833 payload type for DTMF signals.
• DTMF Duration sets the duration of DTMF signals sent from the phone in
milli-seconds.
• The Number of Lines sets the number of flexible buttons allocated for lines. The
minimum is one (1). The maximum number of line buttons is the maximum
number of buttons available on the IP Phone.
• Lock Outgoing Call locks the IP Phone, requiring password entry to place a call.
• Use Speed Number enables or disables use 2-digit dialing to dial Phone Book
contacts.
• Key Tone enables or disables the tone generated when a button on the IP Phone
is pressed.
- Functions
• Private Hold enables private hold for a call on a shared line.
• Barge-In enables the barge-in feature for the shared call.
• Download Flag enables the display of the S/W and configuration download flags
functions under the LCD Configuration Menu.
• One-touch Pickup normally, pressing a line button will connect the call to the
speakerphone or headset. Disabling One-touch Pickup causes the IP Phone to
display the call status when a line button is pressed; the call does not connect to
the speakerphone or handset unless the button is pressed a second time. This
may be useful when the user cannot distinguish LED colors.
- Ring Settings
• Ringer Type sets the default ring type, select one of 14 ring signals for audible
notification of incoming calls,
• Ringer turns the ring signal On or Off.
Release 1.0 September 2010