SIP Configuration, General Parameters
3-21
Chapter 3: Using the LCD Configuration Menu
Edge 5000 Installation / Configuration Guide
SIP Configuration, General Parameters
Parameters in this section assign the overall SIP operation.
Outbound Proxy Address
With the Outbound Proxy Address defined, the IP Phone sends all requests to the proxy instead
of the SIP call server configured in
“Call Server Address” on page 3-14
. The address may be in
the form of an IP address or a FQDN.
To assign an Outbound Proxy Address
•
Press the Settings (
) button. If the LCD Menu is locked, use the unlock
procedure. Refer to
page 3-4
.
•
Press the
digit, or move the cursor to 2.SIP Configuration using the
[Next]-[Previous] softkeys and press the [OK] softkey.
•
Press the
digit, or move the cursor to 2.Outbound Proxy Addr. using the
[Next]-[Previous] softkeys and press the [OK] softkey.
•
Input the Outbound Proxy Address using the dial pad and press the [OK] softkey to
save your entry.
•
Move to another parameter with the navigation buttons and continue the session or
press the Settings (
) button to exit the configuration session.
NOTE
:
To enter alphanumeric characters select the [Mode] softkey. Refer to Appendix E for the
character mapping of dial pad digits.
Changing the Outbound Proxy Address requires a reboot of the IP Phone; when you leave the
menu, you will receive a reboot notice. The IP Phone must reboot to utilize the new values
entered.
Outbound Proxy Port
With the Outbound Proxy Server defined, the associated port must be defined as the Outbound
Proxy Port. All SIP requests are sent to the assigned port instead of the proxy port configured
in
“Proxy Port” on page 3-15
.
To assign the Outbound Proxy Port:
•
Press the Settings (
) button. If the LCD Menu is locked, use the unlock
procedure. Refer to
page 3-4
.
•
Press the
digit, or move the cursor to 2.SIP Configuration using the
[Next]-[Previous] softkeys and press the [OK] softkey.
•
Press the
digit, or move the cursor to 3.Outbound Proxy Port using the
[Next]-[Previous] softkeys and press the [OK] softkey.
Release 1.0
September 2010
Summary of Contents for Edge 5000
