Vertical Edge 5000 Installation/Configuration Instructions Download Page 71

Page: 71 / 168

Auto Answer

3-49

Chapter 3: Using the LCD Configuration Menu

Edge 5000 Installation / Configuration Guide

Auto Answer

When idle, the IP Phone can connect an incoming caller to the speakerphone or headset
automatically.

To enable/disable Auto Answer:

•

Press the Settings (

) button. If the LCD Menu is locked, use the unlock

procedure. Refer to

page 3-4

•

Press the

digit, or move the cursor to 4.Call Preferences using the

[Next]-[Previous] softkeys and press the [OK] softkey.

•

Press the digit, or move the cursor to 6.Auto Answer using the [Next]-[Previous]
softkeys and press the [OK] softkey.

•

Press the [Yes] softkey to enable Auto Answer, or press the [No] softkey to disable
Auto Answer.

•

Move to another parameter with the navigation buttons and continue the session or
press the Settings (

) button to exit the configuration session.

Caller ID Blocking

The IP Phone normally sends the assigned display name as the SIP caller id for outgoing calls.
Optionally, the IP Phone can send "anonymous" as the caller id in SIP message headers.

To enable/disable blocking of caller id:

•

Press the Settings (

) button. If the LCD Menu is locked, use the unlock

procedure. Refer to

page 3-4

•

Press the

digit, or move the cursor to 4.Call Preferences using the

[Next]-[Previous] softkeys and press the [OK] softkey.

•

Press the

digit, or move the cursor to 7.Caller ID Blocking using the

[Next]-[Previous] softkeys and press the [OK] softkey.

•

Press the [Yes] softkey to enable blocking of outgoing caller id, or press the [No]
softkey to disable blocking of outgoing caller id.

•

Move to another parameter with the navigation buttons and continue the session or
press the Settings (

) button to exit the configuration session.

Release 1.0

September 2010

Summary of Contents for Edge 5000









































































































































































Search results

Summary of Contents for Edge 5000

Reviews:

Related manuals for Edge 5000

Brands by name

Popular brands

Vertical Edge 5000, Installation/Configuration Instructions

Search results

Summary of Contents for Edge 5000

Reviews:

Related manuals for Edge 5000

Brands by name

Popular brands