Vertex Standard Spirit VXA-700 Operating Manual Download

Page: 18 / 68

VXA-700 S

PIRIT

PERATING

ANUAL

Reception of Weather Channel Broadcasts
(USA version only)

The

VXA-700

can receive VHF Weather Channel broad-

casts, which may assist your flight planning. The

VXA-

700

includes a ten-channel auto-search feature, which sim-

plifies access to Weather Channels when you are in an
unfamiliar location.

To receive Weather
Channels, press the
key (repeatedly, if nec-
essary) to select the
Weather Channel mode.
In the Weather Channel
mode, “

” will appear

upper left corner of the display.

The

VXA-700

will now scan quickly though the ten

standard Weather Channels, and will stop on the first
active station found.

ASIC

PERATION

If there are two or more weather channels audible in
your area, you may select the alternate channel(s) by
pressing the

PTT

switch. Pressing the

PTT

switch re-

initiates the scanning process.

If there are no Weather Channels in your area, the scan-
ner will not stop. Press the

MONITOR

button to stop

the scanner.

You can also select Weather Channels manually by
rotating the

DIAL

selector knob.

To exit the Weather Channel mode, press the

key

momentarily to return to the VFO mode.

Note

: The Weather Channel mode memorizes the last

Weather Channel you have used, and will retain this infor-
mation until the radio is turned off.

Summary of Contents for Spirit VXA-700





































































Search results

Summary of Contents for Spirit VXA-700

Reviews:

Related manuals for Spirit VXA-700

Brands by name

Popular brands

Vertex Standard Spirit VXA-700, Operating Manual

Search results

Summary of Contents for Spirit VXA-700

Reviews:

Related manuals for Spirit VXA-700

Brands by name

Popular brands