manualshive.com logo in svg

Vertex Standard Spirit VXA-700, Operating Manual, Page: 60 / 68

Share
Download
Vertex Standard Spirit VXA-700 Operating Manual Download Page 60

VXA-700 S

PIRIT

 O

PERATING

 M

ANUAL

58

M

ENU

 

(

“S

ET

”

)

 M

ODE

4. TEMP Unit

Function

: Selects the measurement units for the Tempera-

ture sensor.

Available Values

: °F/°C

Default Setting

: °F

5. TEMP Check

Function

: Enables/Disables the Over-Heating Alarm

Available Values

: Off/On

Default Setting

: Off

6. TEMP Set

Function

: When the “

TEMP Check

” Menu item is set to

“

On

,” and the temperature passes through the threshold

set in this step, the 

BUSY/TX

 indicator will change col-

ors, to alert you to the high temperature condition. The
color of the “High Temperature” indication is set via the
“

TEMP LED

” Menu setting (page 52).

Available Values

: [32.0 °F (0 °C)] - [230.0 °F (110 °C)]

Default Setting

: [122.0 °F (50 °C)]

NOTE

: When the temperature reaches approximately 220

°F (105 °C), the radio will disable transmission, to allow
the radio to cool off.

7. O

PTION

1. Internal MIC

Function

: Internal Microphone On/Off

Available Values

: Off/On

Default Setting

: Off

This controls the status of the radio’s internal microphone
when an external microphone (such as the 

MH-44

A4B

Speaker Microphone or an aviation headset connected via
the 

CT-96

 Headset Cable) is in use. In most applications,

set this Menu Item to “Off” for proper operation (this dis-
ables the internal microphone). The internal microphone
will still function normally when the external microphone
is disconnected.

2. TEMP Offset

Function

: Correcting the Thermometer setting

Available Values

: [-22.8 °F (-12.7 °C)] - [+22.8 °F (+12.7

°C)]

Default Setting

:  0.0 °F (0.0 °C)

This allows you to calibrate the internal thermometer with
a known-to be-accurate source.

Summary of Contents for Spirit VXA-700





































































Reviews:

No comments