VXA-700 S
PIRIT
O
PERATING
M
ANUAL
55
M
ENU
(
“S
ET
”
)
M
ODE
11. SPECT Width
Function
: Selects the visible bandwidth of the Spectrum
Analyzer.
Available Values
: ±30ch/±15ch
Default Setting
: ±30ch
4. T
RANSMIT
1. RPT Shift
Function
: Set the Repeater Shift Direction.
Available Values
: Simplex/–RPT/+RPT
Default Setting
: Simplex
Note
: This Menu Item is only selectable while operating
on the Amateur Band.
2. Shift Width
Function
: Sets the magnitude of the Repeater Shift.
Available Values
: 00kHz – 9.95MHz (50kHz/step).
Default Setting
: 600kHz
Note
: This Menu Item is only selectable while operating
on the Amateur Band.
3. ARS
Function
: Enables/disables the Automatic Repeater Shift
function.
Available Values
: On/Off
Default Setting
: On
4. ARTS
Function
: Enables/disables ARTS operation.
Available Values
: Off/RX/TX/TRX
Default Setting
: Off
Off:
Disables the ARTS feature.
RX:
Use this mode if you only want your radio to listen,
and not poll the other station (in which case their
radio should be set to the “TX” mode). Here, your
radio will beep and display “
In Service
” or “
Out
Service
” to indicate the state of connection.
TX:
Likewise, this puts your radio into a
transmit-only
“beacon” mode where you won’t hear the polling
beeps (but you can still hear when the other station
talks). When activated, you have
no display of
whether the other station is in range
, or not (“
In
Service
” and “
Out Service
” do not appear).
TRX: Activates the ARTS feature with both operating
modes.
5. ARTS Itvl
Function
: Selects the polling interval during ARTS op-
eration.
Available Values
: 15secs/25secs
Default Setting
: 25secs