OWNER’S MANUAL
4/14
VERLINDE se réserve le droit de modifier sans préavis les caractéristiques de son matériel
VERLINDE
reserves the right to alter or amend specifications of its products without notice
12/2014 VESEFRSCXSRA01A
Purpose of this guide
The purpose of this guide is to accurately describe the operation of the system from the user's point of view.
It firstly sets out the general operation of the system then details the hardware and software.
1- INTRODUCTION
STAGEMAKER® CONTROLLER was specifically developed to control VERLINDE STAGEMAKER® SR
series electric chain hoist. Controllers are available with 4 or 8 channels; they fit into a 19" rack flight case.
For more extensive applications, STAGEMAKER® CONTROLLERs can be interconnected to control systems
integrating 16 motors or even more. The standard system provides for the simultaneous activation of all the
preselected motors by means of the START button. Other interconnections are available on request.
STAGEMAKER® CONTROLLER® fully complies with the most recent European electricity standards (IEC
standards / EMC directive) and is approved by APAVE (French inspection authority). They offer great flexibility,
toughness and safety.
1.1 Characteristics / ECO controller equipment for type A hoists (Direct control):
Max. power per channel: 1.8 kW / 400V 3Phases
Power supply: 400/ 415 V 3PH+N
– 50/60Hz.
Power-in plug 32 A 5p CE with phase reversing
Phase monitoring indicating lamp.
Multi 16 connector output for group of motors
And in addition plug CE form 4p 16A out for each motor
Short circuit protections : power & control circuit
Thermal protection per group of 4 motors
-
Max. power per channel :1,8 kW / 400v 3 Ph
