OWNER’S MANUAL
5/14
VERLINDE se réserve le droit de modifier sans préavis les caractéristiques de son matériel
VERLINDE
reserves the right to alter or amend specifications of its products without notice
12/2014 VESEFRSCXSRA01A
1.2 Safety instructions -
THINGS TO DO:
•Place the controller in a protective cover (if a standard protective cover is not provided).
•Manipulate the controller with the handles located at front or on sides.
•Store the controller in its normal working position sheltered from aggressive environments (dust, humidity,
etc).
•Make sure the controller is systematically clean and free from corrosion.
•The installation of the controller must be carried out by a skilled technician.
•Make sure that connecting cables are in good condition and that the connectors are properly installed.
•Make sure connecting cables are always installed symmetrically.
•If the hoist direction does not correspond with Up / Down signals on the controller, check intermediary wiring
and change two phases.
•If none of the hoists correspond with signals, change the phases using the inversion device in the CE plug or
the reversing switch (careful to cut power beforehand).
•Only use authentic spares to replace parts.
•Always be ready to hit the emergency stop button during operations. All functions shall then be disabled.
•Before starting, make sure that the load is properly secured and installed on the hook. The safety latches must
be properly closed.
•Make sure the load is well balanced before moving it.
•Make sure that each hoist is perpendicular with the load and that it hangs freely on its chain before starting
any simultaneous action.
•If the system is used in the open air, use adequate guards against inclement weather.
•Operate the equipment under standard working conditions (ambient temperature, environment, etc.).
•The handling of single items or sets of beams must be entrusted to experienced operators.
•Take all necessary precautions to ensure the load is evenly distributed and avoid overloading any singe hoist
in the case of multiple use. Each hoist must be carefully checked before such use.
•Inform the supervisor of any dangerous functioning or of one which is not reassuring.
(Abnormal noise, abnormal behaviour, etc.).
Equipment used in the open air must be protected as much as possible from inclement weather.
