OWNER’S MANUAL
12/14
VERLINDE se réserve le droit de modifier sans préavis les caractéristiques de son matériel
VERLINDE
reserves the right to alter or amend specifications of its products without notice
12/2014 VESEFRSCXSRA01A
3.4- Operating the controller
Starting up
You must, without fail, comply with start-up instructions to avoid damaging the equipment.
- Connect hoists to the controller
-
Connect the power plug,
-
Reset all circuit breakers (line, controller and motor)
-
Pull the emergency stop into operating position,
-
With all the hoist control reversing switches in position 0, press START and listen for the
line contactor to open and close (sound of contactor). If that does not occur check the
emergency stop(s) and if it still does not function contact your agent.
3.5 Operating
1- Select the operating mode of each hoist with the 3-position reversing switches (4).
Central position: the hoist is not controlled
UP position: UP travel is selected
DOWN position: DOWN travel is selected
2- Pull the emergency stop reset button (5)
3- Start travel movement(s).
Press Start PB (6), start hoist travel depending on selection of reversing switches (5) while
the start PB is held down all the time.
Careful: the controller has no means of checking travel direction of hoists, only the operator
can supervise the operation visually. He is responsible for handling operations;
4- Stopping the equipment.
Travel stops when the Start PB is released.
When the system stops you are advised to activate the emergency stop or even disconnect
the controller.
