10. Remove the brake carefully.
NOTE
Hold the complete double brake
assembly with your hands so that the
parts do not fall apart.
11. Assemble the new double brake.
NOTE
Pay attention to the orientation of the
brake lining.
12. Install the new brake on the shaft.
1.
Secure the fixation with the three
screws. Pre-tighten the screws by
hand.
2.
Tighten the screws with a tool.
3.
If the brake has two more screws,
remove the screws.
NOTE
There may be two extra screws on the
brake. The screws are used during
transportation to keep the brake
components together. Remove these
two screws when you have installed the
new double brake.
NOTE
The top brake is the main brake, and the
bottom brake is the secondary brake.
7 MAINTENANCE
This document and the information contained herein, is the exclusive property of Verlinde S.A.S and represents a non-
public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or
otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S. Copyright 2020
© Verlinde S.A.S. All rights reserved.
6/2020
