6.2
Movements
6.2.1
Controls for movements
The speed corresponds to the position of the direction control. The equipment moves at the
slowest speed when the push button is partially pressed and at the maximum speed when the
push button is fully pressed. The equipment stops moving when the push button is released.
1
When the push button is released, the
equipment stops moving.
2
When the push button is partially
pressed, the equipment moves at a
slow speed.
3
When the push button is fully
pressed, the equipment accelerates
up to the maximum speed.
NOTE
If you press a push button (for example hoist UP) while the opposite direction push
button is pressed (for example hoist DOWN), the lifting device does not change direction.
NOTE
Sudden speed changes increase wear on motors and brakes and can cause an
overtemperature in the motors.
6.2.2
Motor control methods
Two-speed push button control
OWNER’S MANUAL
This document and the information contained herein, is the exclusive property of Verlinde S.A.S and represents a non-
public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or
otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S. Copyright 2020
© Verlinde S.A.S. All rights reserved.
6/2020
