7. Pull the brake cable carefully out on the
brake side.
NOTE
The brake cable is led through the hoist
frame from the brake side to the motor
side. Pay attention to how the brake
cable is led through the hoist frame.
When you have installed the new brake,
you must lead the brake cable again
from the brake side back to the motor
side.
8. Check that the brake data of the
replacement brake matches with the data
of the original brake.
You can find the brake data in the sticker
that is attached to the brake.
9. Remove the three screws that hold the
brake in place.
OWNER’S MANUAL
This document and the information contained herein, is the exclusive property of Verlinde S.A.S and represents a non-
public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or
otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S. Copyright 2020
© Verlinde S.A.S. All rights reserved.
6/2020
