Verizon FiOS TV User Manual Download Page 69

Page: 69 / 185

Wi-Fi aCCESS point ConnECtion

Verify the following information:

• Sta

Status

tus - displays the connection status of the network.

• Ne

Nettw

work

ork – displays the type of network connection.

• Connection T

Connection Type

ype - displays the type of connection

interface.

• Ph

Phyysic

sical A

al Addr

ddress

ess - displays the physical address of the

network card used for the network.

• MTU

MTU - specifes the largest packet size permitted for

internet transmissions:

– A

Aut

utoma

omatic

tic: set the MTU (Maximum Transmission

Unit) at 1500.

– A

Aut

utoma

omatic b

tic by DHCP

y DHCP: sets the MTU according to the

DHCP connection.

– Manual

Manual: allows you to manually set the MTU.

Click Apply

Apply to save changes.

Summary of Contents for FiOS TV























































































































































































Search results

Summary of Contents for FiOS TV

Reviews:

Verizon FiOS TV, User Manual, Page: 69 / 185

Search results

Summary of Contents for FiOS TV

Reviews: