Verizon FiOS TV User Manual Download Page 32

Page: 32 / 185

ComputER nEtWoRk ConFiguRation

Enable the protected setup by moving the selector to On

On.

Use one of the following methods:

• If your Wi-Fi client device has a WPS button, press the

unifed button on your Router for more than two seconds,

then click the WPS button on your Wi-Fi device (client) to

start the WPS registration process.

• If your client device has a WPS PIN, locate the PIN

printed on the client’s label or in the client documentation.

Enter the PIN number in the Clien

Client WPS PIN

t WPS PIN feld. The

Clien

Client WPS PIN

t WPS PIN feld is located in the section 2 - PIN

2 - PIN

enr

enrollmen

ollmentt on the user interface.

• Click R

Regis

egistter

er.

• Alternatively, you can enter the Router’s PIN shown on

this screen into the WPS user interface of your device, if

this PIN mode is supported by your Wi-Fi device.

Summary of Contents for FiOS TV























































































































































































Search results

Summary of Contents for FiOS TV

Reviews:

Verizon FiOS TV, User Manual, Page: 32 / 185

Search results

Summary of Contents for FiOS TV

Reviews: