Verizon FiOS TV User Manual Download Page 181

Page: 181 / 185

REguLatoRY CompLianCE notiCES

11.0/

REGULaTORY COMPLIaNCE NOTICES

11.0a/

Class B Equipment

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning

the equipment of and on, the user is encouraged to try to correct

the interference by one of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit diferent

from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician

for help.

Summary of Contents for FiOS TV























































































































































































Search results

Summary of Contents for FiOS TV

Reviews:

Verizon FiOS TV, User Manual, Page: 181 / 185

Search results

Summary of Contents for FiOS TV

Reviews: