Verizon FiOS TV User Manual Download Page 185

Page: 185 / 185

REguLatoRY CompLianCE notiCES

Caution:

The Fios Router must be installed inside the home. The

Router is not designed for exterior installation.

11.0e/

GENERaL PUBLIC LICENSE

This product contains certain software that is covered by open

source licensing requirements. Copies of the licenses and a

downloadable copy of the source code for the open source

software that is used in this product are available on the following

website:

http://verizon.com/opensource/

All open source software contained in this product is distributed

WITHOUT ANY WARRANTY. All such software is subject to the

copyrights of the authors and to the terms of the applicable

licenses included in the download.

You may also obtain a copy of the source code for the open source

software used in this product for a period of three years after

your receipt of the product by sending a check for $10, payable to

VERIZON, to the address below:

Verizon

One Verizon Way

Basking Ridge, NJ 07920

Attn: Legal, Open Source Requests

Note:

This information is provided for those who wish to edit or

otherwise change such programs. You do not need a copy of any

of such open source software source code to install or operate the

device.

Summary of Contents for FiOS TV























































































































































































Search results

Summary of Contents for FiOS TV

Reviews:

Brands by name

Popular brands

Verizon FiOS TV, User Manual

Search results

Summary of Contents for FiOS TV

Reviews:

Brands by name

Popular brands