VERITAS NetBackup 5240, Hardware Installation Manual

Page: 76 / 146

11
Look for the identifier on the main board near the socket for each DIMM. The
following diagram shows the configuration of the DIMM sockets as viewed from
the front of the appliance. The six fans are located between the DIMMs and
the front of the appliance.
12 Locate the empty DIMM slots that require the addition of a DIMM. DIMMs C2,
D2, B2, A2, G2, H2, F2 and E2 are indicated with red arrows in the illustration.
13
Start with socket C2, on the left side.
14 Open the retaining clips at each end of the socket.
15
Caution: Always hold the edges of the DIMM. Do not touch the front or the
back of the DIMMs.
Lift one DIMM from its ESD-compliant wrapper.
Adding one or more storage shelves to an operating 4TB appliance that does not have any storage shelves
Installing the External Storage Kit components
76