3
Go to the
Monitor
view as follows:
Type
Monitor
and press
Enter
.
4
Type
Hardware ShowHealth
and press
Enter
. Verify that the new storage
devices appear. If the new storage devices do not appear, check the cable
connections and make sure that the power is on.
5
At the prompt, type
return
to return to the
Main
menu.
6
Perform a scan as follows:
■
At the
Main_Menu
prompt, enter
Manage
and press
Enter
.
■
Enter
Storage
and press
Enter
.
■
Enter
Scan
and press
Enter
.
The scan takes a couple of minutes to complete.
7
Navigate to the
Storage
view.
From the Storage menu, enter
Add
and press
Enter
. It displays the disks that
are in a
New Available
state and can be added. Copy a disk ID that is
displayed.
8
At the prompt, enter
add < disk ID >
and press
Enter
. <
disk ID
> is the disk
ID that you copied. Repeat step 7 and 8 to add each disk ID that is displayed.
9
View the available storage space as follows:
■
Navigate to the
Storage
menu.
■
At the prompt, enter
Show Disk
and press
Enter
. The status of the newly
added disks is displayed as
In Use
and space in the Unallocated column
is the disk space available for the new disk.
143
Adding the disk space of additional storage shelves
Adding the disk space of additional storage shelves from the NetBackup Appliance Shell Menu
Summary of Contents for NetBackup 5240
