![background image](http://html1.mh-extra.com/html/veris-industries/e50h-series/e50h-series_installation-manual_1004650018.webp)
ZL0071-0F
Page 18 of 28
©2018 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected] 0818
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
TM
E50H2, E50H5 Installation Guide
BACnet Programming
Information
The E50Hx is programmable via BACnet protocol and can easily be connected to a BACnet MS/TP network using an off-the shelf
BACnet router. It uses five types of BACnet objects. A standard PICS (below) describes the required characteristics of the BACnet
implementation, but this additional descriptive context may be helpful to the integrator.
In addition to the required properties, the device object utilizes some optional properties to support other functionality, Time
Synchronization (primarily used for data/trend logging on the device) and Description and Location properties to simplify
installation and maintenance. Configure all of the meter’s functions, other than Data Logging and writable Device Properties, by
writing the Present_Value of the 11 Analog_Value objects. These values (except for the configuration register, AV1, which always
returns zero when read) are all readable and stored in nonvolatile memory so that they are retained if power to the device is
interrupted.
Data values other than log information and alerts are all accessed by reading the Present_Value of the 52 Analog_Input objects.
Most of these values are instantaneous readings of measured service parameters. Some of them, (AI1, AI26, AI27, AI37-AI45, AI47,
AI50 and AI51) represent accumulated values and are stored in nonvolatile memory as well. If power to the device is interrupted,
these values are retained, but no additional information accumulates until the device completes its re-initialization.
Alerts are used to indicate conditions of potential concern to the installer or the system, such as input voltage or current on any
phase that exceeds the meter’s measurement range, phase voltage below the Phase Loss Threshold set by the user, or Power
Factor below 0.5 on any phase. Alerts are accessible individually by reading the Present_Value of the Binary_Input objects or as a
group by reading the Present_Value of Analog_Input object 52. Alerts are not latched and do not generate events to system. They
indicate presence of these conditions at the time they are read, but the device does not latch and store them until they are read (if
the condition changes before they are read, the alert will go away).
All Analog_Value, Analog_Input, and Binary_Input objects implement the reliability property and use it to indicate that the
Present_Value properties are functional, valid and current. For complete assurance, check the Reliabilty property for a No_Fault_
Detected status before reading the Present_Value of any AV, AI or BI objects.
The E50H5 includes data logging capability, which is implemented using three Trend_Log objects. These are described in more
detail in the section on data logging.
BACnet Protocol Implementation Conformance Statement (PICS)
Date:
January 1, 2013
Vendor Name:
Veris Industries, LLC
Product Name:
E50Hx Energy Meter
Product Model Number:
E50Hx
Applications Software Version:
1
Firmware Revision:
x.xxx
BACnet Protocol Revision:
4
Product Description:
3-phase electrical energy meter
BACnet Standardized Device Profile (Annex L):
BACnet Application Specific Controller (B-ASC)
List all BACnet Interoperability Building Blocks Supported (Annex K):
DS-RP-B, DS-RPM-B, DS-WP-B, DM-DDB-B, DM-DOB-B,
DM-DCC-B, T-VMT-I-B (E50H5 only),
DM-TS-B, DM-RD-B
Segmentation Capability:
Segmentation not supported