Verint Video Intelligence Solutions
83
Nextiva S4200 Series User Guide
Configuring VSIP
Parameters are available to configure the VSIP proprietary communication protocol.
To configure the VSIP parameters:
1. In the navigation pane, expand Configuration > Advanced, then click VSIP. The
VSIP parameters appear.
2. In the VSIP Port box, enter the communication port used by the device. The default
value of all Nextiva devices is 5510.
3. In the VSIP Multicast IP Address box, enter the IP address used by the device to
listen for VSIP queries. The current multicast address is 224.16.32.1 and should not be
changed.
4. In the VSIP Discovery IP Address box, enter the IP address used by the device to
make its presence known with the broadcast method. The broadcast address is
255.255.255.255.
5. In the VSIP Unit Name box, enter the name of the device, as displayed in the top of
the web interface and in the first column of the SConfigurator unit list.
6. To continue the configuration process, select another parameter category in the
navigation pane. Otherwise, click Apply to save the changes in the device. Depending
on the changes you made, a reboot may be required; follow the on-screen instructions
in the Device Configuration Submittal pane.
Note: VSIP ports 9541, 65500, and those under 1024 are reserved and should not be
used, not even for serial port, video, or audio communication. The maximum
value is 65535.
