4: Using the Web Interface
80
Verint Video Intelligence Solutions
Deinterlaced Frame—The MPEG-4 compliant mode where the two video fields are
converted to a progressive scan image by a deinterlacing filter. This filter removes
interlaced artifacts for playback on a progressive scan monitor.
16. To continue the configuration process, select another parameter category in the
navigation pane. Otherwise, click Apply to save the changes in the device. Depending
on the changes you made, a reboot may be required; follow the on-screen instructions
in the Device Configuration Submittal pane.
To configure the encoder parameters for the MJPEG compression mode:
1. In the navigation pane, expand Configuration > Advanced > Video, then click the
desired Encoder. On an S4200-2V or S4200-AS-2V, expand the desired Video Input
before clicking an Encoder.
2. In the Compression Mode box, select MJPEG. The compression mode represents the
way the video is compressed. The following codecs (coders/decoders) are available:
SM4—The proprietary MPEG-4-based mode.
MPEG4 Compliant Simple Profile—The MPEG-4 ISO 14496-2 compliant mode.
MJPEG—The Motion JPEG mode that uses standard JPEG still images.
3. Click Apply to save the changes and see the MJPEG parameters.
The MJPEG parameters appear.
4. In the Target Frame Rate box, enter the maximum number of frames per second
(fps) that will be encoded and transferred by the transmitter. This parameter can be set
to 1 to 7, 10, 15, or 30 fps in NTSC mode and 1 to 6, 8, 12, or 25 fps in PAL mode.
5. In the Input Filter Mode list, select the level of filtering applied to the video signal
before it is encoded, helping to remove high frequency noise from lower quality
cameras or noisy video feeds. The available values are Low, Medium, High, or None.
