Verint NEXTIVA S2800E series, User Manual

Page: 41 / 71

Nextiva S2800e Series User Guide
Verint Video Intelligence Solutions 33
To uninstall an indoor pendant camera:
1. Gently pull down on the outside edge of the lower dome, until it snaps out of place.
2. Push in the tabs on the housing until the camera drive is released.
3. Allow the camera to gently drop down until it is supported by the safety cord.
4. To completely remove the camera drive, disconnect the clip on the end of the safety
cord from the latch on the housing.
To uninstall an outdoor camera:
1. Loosen the four trim ring screws from the outdoor lower dome.
2. Gently pull down on the outside edge of the lower dome, until it snaps out of place.
3. Push in the tabs on the housing until the camera drive is released.
4. Allow the camera to gently drop down until it is supported by the safety cord.
5. To completely remove the camera drive, disconnect the clip on the end of the safety
cord from the latch on the housing.
Nextiva S2800e Series User Guide.book Page 33 Wednesday, March 11, 2009 3:20 PM