Verint NEXTIVA S2800E series, User Manual

Page: 40 / 71

2: Installing and Configuring the S2800e
Verint Video Intelligence Solutions 32
Programming the S2800e
Through an on-screen menu available in Nextiva Review, you can program the following
features of the S2800e:
„
System settings
„
Camera controller
„
Alarm handling
„
Relay driver
„
Source titling
„
Presets
„
Schedule/time of day
„
Language
For more information, refer to the Nextiva S2800e Series Programming Guide.
Uninstalling the Camera
The S2800e camera drive can be easily uninstalled by simply pushing in the tabs to release
the camera drive from the housing or the enclosure. A safety cord is always available to
safely hang the camera drive or camera dome assembly while installing or uninstalling.
To uninstall an in-ceiling camera:
1. Gently pull down on the outside edge of the lower dome, with two hands, until all the
molded tabs snap out of place.
2. Push in the tabs to release the camera drive from the enclosure. It will hang from the
safety cord.
3. To completely remove the camera drive, disconnect the safety cord clip.
Nextiva S2800e Series User Guide.book Page 32 Wednesday, March 11, 2009 3:20 PM