13
Omni 3210 Installation Guide
The first serial port is identified by the
“RS232” icon shown to the right. You use the
RS232 port
to connect a VeriFone CR 600
check reader, or a similar type of serial device.
The second serial port is identified by “Bar
Code” and “PIN Pad” icons, shown to the
right. You use the
Bar Code/PIN Pad port
to
connect a PIN pad, smart card reader/writer, or
bar code wand.
Power Pin Connector Port
•
On the lower right-hand side of the back of the
terminal is a port for connecting the terminal to
a power source. The
Power port
is identified
by the “electrical power” icon shown to the
right.
Step 4: Connect the Terminal to a Telephone Line
You can connect the Omni 3210 to a telephone line in one of
two ways — direct or pass-through. The relative advantages
and disadvantages of these two types of telephone connections
are described below.
About Direct Telephone Line Connections
With a direct telephone line connection, a single telephone line
cord connects the Telco port on the back of the terminal
directly to a nearby RJ-11 type modular telephone company
wall jack (see Figure 8). A direct connection is usually
preferred because telephone line usage is dedicated to the
terminal, making it possible to perform an electronic
transaction at any time.
Summary of Contents for Omni 3210
Page 1: ...Omni 3210 Installation Guide...
Page 4: ...Omni 3210 Installation Guide 4...
