Omni 3210 Installation Guide
24
To insert the end of the connector into the
Power port, align the connector so the plastic
locking part that projects from the connector is
pointing upward. When the connector is in
position, twist it to the left, as indicated by the
word “LOCK” on the connector, and toward
the “locked” icon on the left side of the power
port. The “locked” icon is shown to the right.
To remove the power cable from the terminal,
and to disconnect the terminal from its power
source, turn the connector to the right (toward
the “unlocked” icon on the upper right of the
power port) and remove it from the Power port.
The “unlocked” icon is shown to the right.
Figure 15 Omni 3210 Power Pack Connection
When you have established the power connection to the Omni
3210 terminal, the display screen, and the green LED at the top
left corner of the terminal, light up. (This LED should now be
Summary of Contents for Omni 3210
Page 1: ...Omni 3210 Installation Guide...
Page 4: ...Omni 3210 Installation Guide 4...
