Omni 3210 Installation Guide
12
Figure 7
Omni 3210 Connection Ports
Telephone Line Ports
•
On the left side of the back panel are two RJ-11 type
modular jacks for connecting the terminal to a telephone
line:
The first port is identified by a telephone-
shaped “Telset” icon, shown to the right. You
use the
Telset port
to connect the Omni 3210 to
a telephone base unit to configure an optional
pass-through telephone line connection.
The second telephone line port is identified by
a jack-shaped “Telco” icon, shown to the right.
You use the
Telco port
to connect the Omni
3210 directly to a modular telephone wall jack.
Ports for Attaching Optional Peripherals
•
There are two RJ-45 type modular jacks (serial ports) for
connecting optional peripheral devices:
Card
Reader
Slot
Telset Port
Bar Code /
PIN Pad Serial Port
Power Port
RS232 Serial Port
Telco Port
Summary of Contents for Omni 3210
Page 1: ...Omni 3210 Installation Guide...
Page 4: ...Omni 3210 Installation Guide 4...
