VC4000 Manual
31
4. TRANSIT USE
This section gives specific instructions on how to
use the VC4000 for Transit Bus testing.
User Type
When you first receive your VC4000 the User Type will be “General”
which displays all available data. You should change this setting to
“Transit” User Type. This will show all the data necessary for the
typical transit vehicle brake test.
To change the User Type to
Transit
, follow these steps:
1. Press the Tools key.
2. Scroll to
Setup
and press
ENTER / YES
.
3. Scroll down to
User Type
and press
ENTER / YES
.
4. Scroll up to
Transit
and press
ENTER / YES
.
5. Press
CLEAR / NO
to get back to the READY screen.
Or use Profile to change the setup in the VC4000 from your PC:
1. Start the Profile program
2. Connect the VC4000 to your computer
3. Turn on the VC4000
4. In Profile, Click on the VC4000 Setup icon (or Tools/VC4000
Setup)
5. Profile will connect and retrieve the VC4000 setup
6. Click the
User Type
drop down box
7. Select
Transit
.
8.
Click the “Send Setup” key
ALL settings can be changed using Profile. Not all settings can be
changed using the VC4000 keypad.
Initial Setup
