29.0
Fuses
The following fuse types are present:
Supply Fuses: 38 mm x 10 mm type F, 16 A – 6 total (4 on board EMC filter units; 2 in
separate holders).
Auxiliary Fuses (on board EMC filter unit): 20 mm x 5 mm glass type F, 2 A.
29.1
Customer Supply Fusing
High break capacity fuses should be used. Avoid fast-blow fuses and magnetic trip
circuit breakers - consult Carbolite Gero if in doubt.
The supply fuse rating should be as follows:
Model
Phases
Volts
Supply Fuse Rating
ABA 7/35
1-phase
200 V - 240 V
40 A
ABA 7/35
3-phase with neutral
380/220 V - 415/ 240 V
16 A per phase
ABA 7/35
3-phase delta
200 V - 240 V
25 A per phase
29.2
Power Settings
The ABA 7/35 uses electronic power limiting to enable the same heating elements to be
used over the complete range of voltages from 200 V to 240 V.
It is important to set the voltage setting as described in "Reconfigure Voltage Settings
For Alternative Electrical Supply".
Please refer to the rating label for product specific information.
91
29.0 Fuses
Summary of Contents for CARBOLITE GERO ABA 7/35B
