Appendix C –Telescopic Camera Operation
Give us your thoughts
Ver-Mac 2019
PCMS Operations, Safety & Maintenance V2
59
Warranty Statement
(Updated February 2016)
Our warranty applies to all equipment newly-manufactured by Signalisation Ver-Mac Inc.
subject to normal use for which the equipment and/or components were intended.
•
Electronic components manufactured by Signalisation Ver-Mac Inc., are warranted for a period
of twenty-four (24) months from the date of delivery to the original purchaser.
•
All non-electronic components manufactured by Signalisation Ver-Mac Inc., are warranted for a
period of twelve (12) months from the date of delivery to the original purchaser.
Components not manufactured by Signalisation Ver-Mac Inc. are warranted
following the terms of the component’s manufacturer.
Limitations
The warranty is contingent on the following two conditions:
•
Signalisation Ver-Mac Inc. does not warrant any of its equipment, or parts thereof, against any
deterioration or damage caused by normal wear, lack of reasonable and proper maintenance,
failure to follow operating instructions, misuse, lack of proper protection during storage,
collisions, accidents, natural catastrophes or unforeseen events.
•
The equipment has been connected to a power source of the correct voltage and amperage.
Exclusions
Under no circumstances shall this warranty extend to:
•
Any of our products which have been modified, repaired, or altered in any way, in any
establishment other than the Signalisation Ver-Mac Inc. factory without authorization from
Signalisation Ver-Mac Inc.
•
Replacement parts not supplied by Signalisation Ver-Mac Inc.
•
The obligations of Signalisation Ver-Mac Inc. shall in no way exceed the initial cost of the
equipment or part upon which such liability is based.
Repair or Replacement
Repair or replacement of any equipment or defective component shall always be at the
discretion of Signalisation Ver-Mac and shall be carried out at its factory, unless otherwise
agreed by prior arrangement with Signalisation Ver-Mac.
•
Signalisation Ver-Mac shall not be held liable for any cost incurred by the owner in the
execution of repairs.
•
Signalisation Ver-Mac shall not be held liable for reimbursement of any indirect or
incidental expenses incurred in either the removal of defective equipment or
component, nor in the installation of replacement parts.
•
The end user is responsible for the cost of shipping, duties and handling related to
defective parts returned to Signalisation Ver-Mac Inc. Signalisation Ver-Mac Inc. will
assume the return cost of shipping via regular service of replacement or repaired parts.
Summary of Contents for PCMS-1500
Page 6: ......
