Veolia ELGA PURELAB Option-S 15-US, Operator'S Manual, Page: 6 / 34

PURELAB Option-S 7/15 US Operator Manual ELGA
Page 2 PURELAB Option-S 7/15 US Version 1 08/14
2. HEALTH AND SAFETY NOTES
PURELAB Option-S US products have been designed to be safe,
however, it is important that personnel working on these units
understand any potential dangers. All safety information detailed in this
handbook is highlighted as WARNING and CAUTION instructions.
These are used as follows:
WARNING! WARNINGS ARE GIVEN WHERE FAILING
TO OBSERVE THE INSTRUCTION COULD
RESULT IN INJURY OR DEATH TO
PERSONS.
CAUTION! Cautions are given where failure to
observe the instruction could result in
damage to the equipment, associated
equipment and processes.
2.1 Electricity
It is essential that the electrical supply to the PURELAB Option-S US
is isolated before any items are changed or maintenance work
performed.
The ON/OFF switch is located at the left-hand side of the unit. The
mains power lead is located just behind the ON /OFF switch.
WARNING! THIS APPLIANCE MUST BE EARTHED.
2.2 Pressure
The main water supply pressure should be isolated and residual
pressure released prior to removal of any cartridges or carrying out
work on the unit.
2.3 Control of Substances Hazardous to Health (COSHH)
Material safety data sheets covering the various replaceable cartridges
are available upon request. Contact your local supplier or distributor.
Fuse
ON/OFF
switch
Mains power lead
Mains power socket
Mains Power Supply