ELGA
PURELAB Option-S 7/15 US
Operator Manual
PURELAB Option-S 7/15 US Version 1 08/14
Page 11
5. INSTALLATION INSTRUCTIONS
5.1 Unpacking the PURELAB Option-S US
The following items should be supplied with your
PURELAB Option-S
US
:
1.
PURELAB Option-S US
unit
2. Cartridge Pack LC141
3. Installation kit (LA513 or LA506)
4. Operator Manual
5. Mains Lead
5.2 Positioning the PURELAB Option-S US
Before commencing with installation and operation of the
PURELAB
Option-S US
unit, please read and observe the following points.
Environment
The unit should be installed on a flat, level surface, in a clean,
dry environment. The unit can also be wall mounted against a
vertical wall capable of supporting the weight (for this we
recommend the use of the wall mounting kit Part No LA610).
CAUTION
!
If unit is to be wall mounted, ensure it is
mounted on a substantial brick or concrete
solid wall capable of supporting the
operating weight of the system. If
mounting the unit on the wall, use the wall
mounting kit and follow the instructions
included in the kit.
Note:
Refer to specifications for unit weights.
The unit is designed to operate safely under the following conditions:
•
Indoor Use
•
Altitude up to 2000m
•
Temperature Range 5 - 40°C
•
Maximum Relative Humidity 80% @ 31°C decreasing linearly
to 50% @ 40°C, non-condensating
The unit is in Installation Category II, Pollution Degree 2, as per
IEC1010-1.
Rear mounting locations points
Unit Rear Mounting Points
Summary of Contents for ELGA PURELAB Option-S 15-US
Page 1: ...PURELAB Option S 7 15 US Operator Manual ...
Page 2: ......
