9
Wiring diagram 2
L and N terminals are connected to live and neutral respectively and L and LT terminals are joined by the jumper.
The fan is always in SILENT mode. 24 HOURS mode may not be activated.If the temperature rises above the set point,
the fan is switched to MAX (by default) or SILENT (if set) mode. After the indoor temperature falls 2
°
C below the set
temperature point, the fan reverts to the previous mode.
Fan operates with air
3
flow 83/72 m /h (MAX)
40/33 m3/h (
SILENT
)
Temperature
rises
MAX (SILENT)
mode is activated
Temperature falls 2
°
C below
the set temperature point
L
T
L
N
N L
