1
7
EXTRA FUNCTION - SWITCHING FAN ON/OFF
This function may be controlled from the remote controller only. If the fan is switched off with the button "1RC" on the
control panel, the light indicator on the fan goes off and the fan does not response to any external functions
(temperature fluctuations or activation by the external switch). The interval ventilation function remains activated and in
15 hours the fan switches on to ventilate a premise for 2 hours.
EXTRA MODE - INTERVAL VENTILATION
Automatic function. It can not be adjusted or turned off. After 15 hours standstill the fan is switched on for 2 hours to ventilate
the room with air capacity 83/72 m3/h. If the fan receives a signal from the temperature sensor or in case of the external switch
activation during the interval ventilation mode the fan switches to the respective mode.
RESET TO FACTORY SETTINGS (RESET)
The fan side panel incorporates a built-in manual power slide switch. Turn the fan off with this power switch, press the button
"MODE" on the control panel, hold this button and switch the fan on with this slide power switch. When the fan turns on,
hold the button "MODE" within 5 seconds until the light under the button stops blinking green.
Push
