16
TEMPERATURE SENSOR SET POINT ADJUSTMENT
The default temperature is 24
°
C.To adjust the switching temperature
to higher speed: press and hold the button "6CP" and press the
buttons "3CP" and "4CP" on the control panel.
press the buttons "11RC" on the remote controller.
Press and hold the button "6CP" on the control panel once to display
the current indoor temperature.
ACTIVATION 24 HOURS MODE24 HOURS
mode is turned off by default. In this mode the fan runs with minimum
air capacity before the temperature sensor or external switch is activated.
The green light indicator under the button "6CP" on the control panel is
on when 24 Hours mode is activated. To activate 24 HOURS mode:
Press and hold the button "7CP" on the control panel and press the button "6CP".
Press the button "10RC" on the remote controller.
This function is not available for the wiring diagram 2.
EXTRA FUNCTION - PAUSE
This function is controlled from the remote controller only. In you do not want to feel disturbed by the fan operation,
you may stop it for 45 minutes by pressing the button "7RC" on the remote controller.
The fan reverts to the previous operation mode after the timer countdown or after pressing the button "7RC" once again.