Trouble Shooting
Problem
Possible Cause
Possible Remedy
Wobbles
Blade Screws are loose
Check that all screws are securely tightened.
Do NOT overtighten.
Blades are loose
Check all blades are aligned correctly and
securely fastened.
Blades are bent, out of shape
Stack blades on flat surface, check all blades
are a uniform shape.
If blades are not uniform, contact your retailer
for replacement blades.
Rod hanger ball not correctly
seated in bracket
Turn Fan Off and gently lift fan, rotate hanger
ball to its correct position in bracket.
Noisy
Blade Screws are loose
Check that all screws are securely tightened.
Do NOT overtighten.
Canopy touching ceiling
Lower the top ceiling canopy so it doesn’t
make contact with ceiling.
Bracket not installed correctly
Turn off fan, disassemble and re-install bracket if
not installed correctly.
Fan noise
Allow for fan to settle in 4-8 hours of operating.
Ripple control signal noise
Read Ripple Control.
Contact your licensed electrical contractor
and install a suitable signal filter.
Fan Not Working
Loose wires
Turn fan off, check all connections at terminal
block
Circuit Breaker Blown
Check circuit breaker. If circuit tripped, please
contact your licensed electrical contractor.
12
